CamSafe

    •    Contact free filter change
    •    Automatic tension regulating filter clamping device
    •    Fast secure filter installation, lever operated
    •    Optional filter seal seating test as per DIN 1946, Part 4
    •    Sealed, welded, solid design
    •    Tightness class B as per EN 1866 at 5000 Pa
    •    Ready flanged
    •    CamSafe connecting pieces can be supplied in various designs


Application: CamSafe chambers are used when filtering radioactive, toxic or bacterial particles and gasses and provide maximum safety for the operator. Areas of use include laboratories, isolation wards and the pharmaceutical industry. The casings can be joined together so that multi-stage filter systems with a volume flow of up to 24,000 m3/h can be achieved.
Epoxy coated casing: Epoxy resin coating in RAL 9010 which is capable of being decontaminated, clamping device made from high grade steel 1.4301.
Steel casing: Manufactured in high grade steel 1.4301.
Standard design: Material thickness 2mm, flange drilled ready for operation, service cover with male thread hand knobs, changing bag, support shelf for contact free filter changing, automative tension regulating filter clamping device.
Options: Filter seal seating test device in accordance with DIN 1946 Part 4, pressure compensation device and pressure check points.
Filter cartridges:
Prefilter P1: 610x610x47mm .
Prefilter P2: 610x610x292mm.
Main filter: 610x610x292mm.
All main filters come equipped with straps to aid the handling, enabling them to be changed easily.
The filters can be supplied with a variety of gaskets to suit the application.
The casing is suitable for different classes of filter, suitable for dealing with glasses or particle contamination.
Accessories: Safe change bags, manometers and material for the flanged joints supplied on request.

CamSafe Housing casings can be joined in serial for multi-stage filtration of air flow volumes up to 24,000 m3/h.
Camfil Farr’s CamSafe Housings offer the following advantages:
    •    Contact-free filter change-out
    •    Filter clamping device with automatic tension regulation
    •    Fast and secure filter installation, lever-operated
    •    Optional filter seating test according to DIN 1946, Part 4
    •    Sealed, welded and solid design
    •    Tightness Class B according to EN 1866 at 5,000 Pa
    •    CamSafe connecting pieces can be supplied in various designs
    •    Available in a powder-coated or stainless-steel finish
All main filters can be equipped with straps to facilitate handling and change-out. The filters can be supplied with a variety of gaskets to suit the specific application. The casing accommodates different classes of filters that are suitable for dealing with gas or particle contamination.
Areas of use include laboratories, isolation wards and the pharmaceutical industry.{jd_file file==56}